Waterproof coating is a liquid material from the acrylic emulsion and additive composition of the powder made of cement, sand and mineral powder on with a combination of specific ratio from two-component waterproof material. After mixing the two materials chemical reaction occurs, forming a surface coating both waterproof and can penetrate in the end material is formed inside the crystal water through repression, the dual waterproof effect. Usage: · Mixing: first liquid material into the container, then slowly add the powder, and stir for 3-5 minutes until a homogeneous slurry and no raw dough particles can be used; (preferably using stirrer) · Brushing: Brushing with a brush or brush directly in the base surface, the intensity of the use of high-speed rail waterproof coating evenly, not leak brush; brushing normally takes 2 times (according to the use requirements) two-component polyurethane waterproof paint, brush each no thicker than 1mm; once before, after brushing once again be a slight dryness (just sticky, general interval 1-2 hours) aqueous polyurethane waterproof coating, the front and rear vertical cross brushing, brushing The total thickness is 1-2mm; if the coating has been cured, brushing another wet with water first. K11 waterproof coating waterproof coating _ _ Yantai Yue-kun waterproof by Weifang waterproof material Ltd. Yue-kun. Weifang Kun Yue waterproof material Ltd. (www.wfkunyue.com) (www.kunyuefangshui.com) strong, credible, Shandong Weifang waterproof, moisture-proof materials industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Kun Yue water into the brilliant and you work for a better future!